manual

Reconnect the side 3 release buckles
(A, B and C) to the T-212/214.
Adjust the height by setting the upper strap (A)
and then tightening the 2 straps (B and C) to
secure the T-212/214 in a convenient position.
Now you are all set. All you
have to do is open the right
side release buckle (B),
and you can put on and take
off the whole system without
changing the adjustments.
Find and disconnect the 3 straps supplied
with the T-212/214.
On one side of the strap you will find a slik-
clip buckle (A) and on the other side a side
release buckle (B).
The EPH system enables you to
attach the W-92/4 to R-101/2/3
,RL-302 backpacks.
This configuration lets you create a
larger backpack that provides better
weight distribution between the
shoulders and the hips. The waist
packs main compartments stays
accessible - no need to detach the
bags.
Connect the slik-clip buckles on the
bottom of the backpack to the
designated tabs on the W-92/4 waist
pack.
Note: You can disassemble the hip
belt before attaching the W-92/4 .
Waist-pack + Backpack configuration
Torso-pack + Backpack configuration
The torso pack T-212/214 enables frontal
carrying for quick access to your Camera
and essential gear, while the backpack
stores all additional equipment.
Connect the slik-clip buckle to the
backpacks left shoulder strap.
Connect the remaining 2 slik-clip
buckles to the loops on the lower left
and right sides of the backpack.
Waist-pack + Torso-pack configuration
Slik clip
connecting
buckle
Connect the 3 slik clip
buckles to the designated
tabs on the T-212/214 Torso-
pack and the W-92/4.
This configuration can be carried with a
back pack or by itself, using the provided
back mesh harness.
The EPH system is both
modular and versatile. You can
connect a bag or pack that is
part of the EPH system to
another bag or link 2-3 bags
together.
The Ergonomic Photo (EPH) system
1
2
3
4
Development & production by KATA Ltd.
POB 45078 Jerusalem , Israel 91450
Tel: [phone]
Fax: + 972-2-5400504
www.kata-bags.com
Info: [e-mail]
Sales: [e-mail]
KATA. A SIMPLE CASE
OF BETTER DESIGN.
A
B
DS260307
Attachment stages:
W-92/4
KT W-92/4
RL-302
KT RL-302
T-212/214
KT T-212/214
HB-205/7
KT HB-205/7
BP-502
KT BP-502
R-101/2/3
KT R-101/2/3