Instructions / Assembly

Hardware
1.Top Shelf
2. 2PCS Side Rack
4. Middle Shelf
3. Bottom Shelf
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
3 Shelf Bookcase Assembly Instruction
BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION
CAREFULLY, PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID
ASSEMBLY DIFFICULTY.
COMPONENTS:
Make sure the ground is clean and smooth. Take all
packaging off the bookcase. Lie down 1pc of side
rack on the flat ground.
Allen Key Driver Long Screws: 12pc Flat Washers:12 pc
Attach the middle shelf and top shelf to the side
rack using 2pcs screws and flat washers
respectively. Allen key driver is required during the
assemble process.
IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.
WARNINGS!
Attach the another side rack to the 3 shelf using
6pcs screws and flat washers. Allen key driver is
required during the assemble process.
Attach the bottom shelf to the side rack using 2pcs
screws and flat washers. Allen key driver is
required during the assemble process.
Now turn the bookcase up to right side. If the table
is not stable enough, please check the structure and
tight the screws to make it stable.