Assembly Instructions Components List A (1) C (2) B (2) D (8+2 extra) F (1) E (8+2 extra) G (8+2 extra)
Step 1: Make sure all parts are properly aligned. Do not fully tighten all screws; first assemble all pieces (Cx2 and Ax1) & align the holes in metal base with holes in wood top and partially tighten the (E) screws to approx. 50%. C E G A A X2 Note: Half tighten screws allows the person assembling the product to adjust and align the parts perfectly Step 2: Align the holes in metal base with holes in metal arch (C and B) and partially tighten the (D) screws to approx. 50%.
Table is ready with all parts aligned and partially screwed together.
Step 5 – Your Table is ready for use.
