Config Guide
61 of 122
④
Connection config
configures the secure connection and the backward compatibility
1
3
2
4
①
► Check
Allow only secure connection
so that all connections are secure.
②
activates or deactivates compatibility to Generation 2 KBRP
③
reads the current secure connection and backward compatibility configuration
④
sets the secure connection and backward compatibility configuration
⑤
NTP settings
enters a preferred NTP
1)
server; see
Changing NTP Settings, p.61
⑥
DNS server settings
changes DNS server settings; see
Changing DNS Server Settings, p.62
Changing NTP Settings
To simplify the time setting, it is possible to enter a preferred NTP server. This way, in a defined interval, the reader
retrieves the information from the NTP server and gets the time from the network, thus setting the internal time settings
of the reader.
► Click
NTP settings
(②).
➯ The following dialogue opens.
1
3
2
4
5 6
7 8
9 10
①
NTP server
enters an NTP server address, e.g. 0.pool.ntp.org
②
Interval
sets the interval in the range 0–4204967295 s to synchronise the time with the NTP
server
③
Time
shows the current date and time of the reader
④
Status
shows the status of the last performed operation in the
NTP setting
s dialogue
⑤
Get NTP server
reads the NTP server settings currently set in the system
⑥
Set NTP server
sets the NTP server selected at ①
⑦
Get interval
reads the interval currently set in the system
⑧
Set interval
sets the interval selected at ②
⑨
Get time
gets the current time of the reader
⑩
Set time via NTP
manually synchronises the time with the NTP server
1)
Network Time Protocol