Config Guide

73 of 122
Wi-Fi
3
5
3
4
5
6
7
8
1
10
2
9
11
12
13
14
15
16 17 18
19
20
Fig. 37: Communication configuration Linux model: Wi-Fi
①
Refresh reads the current settings of the communication configuration Linux module
②
IP4 see Fig. 36,p.72
③
IP6 enters the second IPv6 address (the first IPv6 address is the link local address)
④
Status shows the status of the Wi-Fi connection
⑤
IP address shows the current IP address
⑥
SSID shows the name of the access point
⑦
MAC shows the MAC address of the access point
⑧
Frequency shows the frequency of the Wi-Fi connection
⑨
IsOnline shows whether the Wi-Fi module is online
⑩
Get status reads the current status of the Wi-Fi module
⑪
Go online establishes the Wi-Fi connection
⑫
Go oine interrupts the Wi-Fi connection
⑬
Go online at start activates or deactivates the Wi-Fi connection as soon as the reader starts
⑭
shows the list of the configured access points with SSID and password; the access points are
shown in the priority order
⑮
changes the priority of the selected access point