Config Guide

84 of 122
Operating the Reader Using the ReaderStart Software
14.3.4 Options
2
3
1
4
5
6
7
Fig. 44: Basic reading: options
①
Memory bank
selects between RFU , EPC , TID and User memory banks
► Click on the arrow to open a drop-down list to select a memory bank.
► Click Save to file (④) to store the values RFU , EPC , TID and User in a CSV file.
②
Break after
reading
specifies the duration of the break between two inventories in milliseconds
During the break, the carrier can be deactivated.
► For more information about switching o the carrier, refer to Configuration Manual for Kathrein RFID
UHF Readers .
③
Bulk reading
sets the time in milliseconds after which the result lists of an inventory is sent to the PC
To keep the time between inventories as short as possible in the synchronous mode, data trans-
mission between the inventories can be dispensed with. That means that the reader saves all the
tags that it finds in the field in its internal RAM and sends them to the PC after the time set in Bulk
reading .
④
Save to file
saves the data displayed at (Ⓐ in Fig. 41,p.81 )
► Click Change path to log file to select or change the location where the information is saved.
► Right-click on Save to file to open or delete the file.
⑤
Selected tag as
background
changes the basic reading interface background to the colour of the selected tag row
⑥
ARU-CSB-ELC activates the additional presentation for an ARU-CSB-ELC antenna
⑦
Show data as
UTF8
shows tag data in the UTF8 format