Config Guide

57 of 122
Options
1
2
3
4
5
6
7
8
Fig. 27: Options
①
Language select
selects the user interface language between English / German / Spanish / French
1. Click Language select (① in Fig. 27 ).
➯ The four languages are shown. The language applied in the user interface is
marked with a tick.
2. Click on the desired language.
➯ A pop-up message appears: Question. Please restart the programme to apply changes.
Restart now?
3. Click Yes to restart the programme and change the language or
Click No to cancel the changes.
➯ If you have pressed Yes , the programme restarts and the language of the user
interface has been changed.
②
Reset layout
resets the sequence of the tabs to default settings and reduces the size of the pro-
gramme to the window size
③
Change path to log file opens a dialogue to create a new folder/select a new directory to save logs
④
Show "No Tag" as warning
activates or deactivates the warning (yellow) in the status field if no tag has been
detected in the antenna field; see Status Field, p.66
If this parameter is not checked, the absence of the tag is shown as error (red) in the
status field; see Status Field, p.66
⑤
Auto tag read on tab change activates or deactivates reading tags after the tab change
⑥
Firmware update updates the reader firmware; see Updating Firmware, p.58
⑦
Date and time settings sets date, time and time zone on the reader; see Changing Date and Time Settings, p.59
⑧
Load factory defaults loads factory default settings onto the reader; see Loading Factory Default Settings, p.60