Config Guide

115 of 122
14.14 Authentication
Using this function, it is possible to authenticate a tag.
The Authentication tab consists of 4 areas, Get All Tags , Tags , Key and functions that are described below.
1
4
2
3 5
Fig. 80: Authentication
①
Password enters the access password; see Password for Operation, p.101
②
Get all tags reads all the tags in the antenna field
③
Tags shows all the detected tags
④
Key see Key, p.115 ; necessary for TAM1 and TAM2
⑤
Functions see Functions, p.116
14.14.1 Key
1
4
2
3
Fig. 81: Authentication: Key
①
Key 0/Key 1
selects a key for the authentication ( Key 0 is only used for TAM1 , Key 1 is used for both TAM1 and
TAM2 )
②
Key
enters the key selected in ①
③
Crypto suite selects the crypto suite
④
see Functions, p.116