Installation Manual Part 2
Installation manual Reader 50
Modications, misprints and errors excepted.
English
6. Operating the reader
6.2. Application
Figure: Application tab
The Application tab enables quick and easy conguration of the Kathrein RFID Reader for a selected application. The
available applications are represented visually in the upper area of the tab by labelled pictograms. Under the Settings
header, the number of tags expected, the antennas to be used, the parameter set in which the conguration should be
saved and the values for max. read frequency and max. read reliability options are stated.
When the button for the desired application is clicked, it glows green continuously. In addition the designation,
the properties and the settings of the selected application are displayed in the respective elds.
The following applications are available for selection in version 2.00 of the ReaderStart v2:
• Conveyor belt > 2 m/s
o Application for detecting individual tags in the antenna eld on a conveyor belt moving at more than 2 m/s
o the distance between the tags and the antenna is only a few centimetres
• Conveyor belt ≤ 2 m/s
o Application for detecting and describing individual tags in the antenna eld on a conveyor belt moving
at less than or equal to 2 m/s
o the distance between the tags and the antenna is only a few centimetres
• Gate
o Application for detecting multiple tags in the antenna eld as they pass through a gate
• Slot monitoring
o Application for detecting and describing multiple tags in the antenna eld, which are not moving
o the distance between the tags and the antenna should be less than 1 m
• Vehicle identication
o Application for detecting and describing multiple tags in the antenna eld, which are moving at more
than 14 m/s
o the distance between the tags and the antenna should be less than a few metres