Installation Manual Part 2

Installation manual Reader 62
Modications, misprints and errors excepted.
English
6. Operating the reader
6.6. Expert settings
6.6.1. Expert settings 1
Figure: Expert settings 1 tab
The ReaderStart v2 software is a powerful tool for conguration of the reader. It allows the reader to be customised
to any application. The expert settings 1 and 2 allow the reader's RF interface and communications prole to
be optimised to the tag so that the reader is optimally customised to the application.
There are eight parameter sets available for saving the conguration of the reader. All settings for the transmission
power, the antenna multiplex conguration, the RF settings and the air interface parameters can be saved in these
memory slots. Other parameters can be changed in Expert settings 2. See section ((B)) „congurational manual reader“
for more information about the individual parameters.