Installation Manual Part 2
Installation manual Reader 71
Modications, misprints and errors excepted
English
6. Operating the reader
6.8. © KRAI-Settings
The basic settings of the reader parameters appear in this Installation Manual Reader from Chapter 6 “Descriptions and
operation of the reader” and can be set and congured through the Reader Start Software.
© The KRAI-specic settings are explained in the following text. You can nd this setting in the Reader Start Software
section, under the tab "KRAI".
Figure: Overview of index card KRAI
The Reader recognises the connected antennas at boot up, but this can also be done manually by selecting a single
port or through the “All” option from the dropdown menu section port. Initialize the button port then runs the query
through the antennas in this / these ports.
When a port is selected from the drop-down list information on this port will be listed under port information specied in
characteristics depending on the antenna type and features.
Port information which had been collected through initialisation can be called up by pressing the “Read port info” button.
This action list is executed automatically by default for every port initialisation and port selection in the drop down menu.