Installation Manual Part 2

Installation manual Reader 81
Modications, misprints and errors excepted
English
6. Operating the reader
6.12. conguration password
The following commands will be protected against changing by the conguration password:
* SetCommunicationStandard
* SetPortPower
* SetCarrierFollowUpTime
* SetPortMultiplexSequenceAndExposureTime
* SetCableLossAndAntennaGain
* SetETSIPortChannelList
* SetETSIPortChannelSwitchingMode
* SetProle
* SetModulationType
* SetExtendedResultFlag
* SetDefaultParameterSet
* SetActiveParameterSet
* SetParameterByCongId
* SetIOCardHwCong
* SetIOCardProtocolCong
* SetTime
* SetAntennaMapping
* LoadFactoryDefaults
* FirmwareUpdatePrepare
* SetSelSessionAndTarget
* SetInitialQ
* SetMaxAirCommErrors
* SetASyncObservedListParameters
The conguration password can be set at “Expert settings2”. To reset the password, a empty input will be set at
the option “Set cong password”.
After entering the password you have 30 seconds to perform changes. Each time you save the changes, the expire
time is extended by another 30 seconds. If you want to save changes after the 30 seconds, you get the system mes-
sage „Access Denied“.