User's Guide

100 of 146
Operating the Reader Using the ReaderStart Software
16.3.4 Options
2
3
1
4
5
6
7
Fig. 55: Basic reading: options
①
Memory bank
selects between RFU , EPC , TID and User memory banks
► Click on the arrow to open a drop-down list to select a memory bank.
► Click
Save to le (④) to store the values RFU , EPC , TID and User in a CSV le.
②
Break after
reading
species the duration of the break between two inventories in milliseconds
During the break, the carrier can be deactivated.
► For more information about switching o the carrier, refer to
Conguration Manual for Kath-
rein RFID UHF Readers .
③
Bulk reading
sets the time in milliseconds after which the result lists of an inventory is sent to the PC
To keep the time between inventories as short as possible in the synchronous mode, data trans-
mission between the inventories can be dispensed with. That means that the reader saves all
the tags that it nds in the eld in its internal RAM and sends them to the PC after the time set in
Bulk reading .
④
Save to le
saves the data displayed at (Ⓐ in Fig. 51
► Click Change path to log le to select or change the location where the information is saved.
► Right-click on
Save to le to open or delete the le.
⑤
Selected tag
as background
changes the basic reading interface background to the colour of the selected tag row
⑥
ARU-CSB-ELC activates the additional presentation for an ARU-CSB-ELC antenna
⑦
Show data as
UTF8
shows tag data in the UTF8 format