User's Guide
104 of 146
Operating the Reader Using the ReaderStart Software
16.4.1 Selecting Functions
► Click on the arrow (③ in
Fig. 58,
to select between the following functions:
2
3
1
4
5
6
7
10
11
9
12
8
13
Fig. 60: LED: functions
①
O
deactivates the LED
②
On
activates the LED (always on)
③
1 Hz
–
8 Hz
frequency
LED ashes at a frequency of 1/2/4/8 Hz
④
RF on
LED lights up for
Turn-o time
milliseconds if a radio frequency is present at the antenna
First
antenna
to
Last antenna
has been successful
⑤
Antenna error
LED lights up for
Turn-o time
milliseconds if a error occurs at the antenna
First antenna
to
Last
antenna
⑥
Tag found
LED lights up for
Turn-o time
milliseconds as soon as a tag has been found at the antenna
First
antenna
to
Last antenna
⑦
Tag operation
success
LED lights up for
Turn-o time
milliseconds if a tag operation at the antenna
First antenna
to
Last
antenna
has been successful
⑧
Protocol
access
enables the protocol to switch the LED on and o
⑨
KRAI status
shows whether a @KRAI antenna is connected to the reader
⑩
Wi-Fi status
shows the Wi-Fi status
ashing trying to connect
permanently lit connected
o Wi-Fi disabled
⑪
GSM status
shows the GSM status
ashing trying to connect
permanently lit connected
o Wi-Fi disabled
⑫
Bluetooth
status
shows the Bluetooth status
ashing trying to connect
permanently lit connected
o Wi-Fi disabled