User's Guide

113 of 146
16.8 Expert Settings 2
The Expert settings 2 tab is divided into four sections for further conguration of the reader. In this tab, it is possible, for
example, to change the default parameter set, copy one parameter set into another, read reader parameters to deter-
mine their ID and congure Select Filter Settings .
Fig. 68: Expert settings 2
16.8.1 Default Parameter Set
The Default parameter set allows conguration of the parameter set that is loaded from the Flash into the RAM when
the reader is started.
2
3
1
4
5
6
Fig. 11: Expert settings 2: default parameter set and copy parameter set
①
Default Param-
eter Set
selects a default parameter set
②
Set sets the selected default parameter set in the reader
16.8.2 Copy Parameter Set
The Copy parameter set allows one parameter set to be copied into another.
③
Source param-
eter set
selects the parameter set to be copied
④
Target param-
eter set
selects the parameter set into which the source parameter set is to be copied
⑤
Copy
copies the parameter set
► Click
Copy .
➯ On successful completion of the copy operation, the
Copy button briey glows green and
a corresponding message is displayed in the status eld.
➯ If there is an error, the
Copy button glows red, an error pop-up message appears and a
warning is shown in the status eld.
⑥
shows the progress of the copying process