User's Guide

116 of 146
Operating the Reader Using the ReaderStart Software
➯ The reader only reads the tags with the ltered value (marked green). The tag without the ltered value is not
read (marked red).
16.9 Test Gen 2 Functions
This tab makes it possible to access individual tag functions. In addition to the functionality in accordance with the EPC
Gen2 standard, it is possible, for example, to read and write tags as well as set and change tag passwords.
The user interface consists of the elds
Get all Tags , Password for Operation , Write EPC , Read data , Write data , Change
Password , Lock and Kill that are described in the following chapters.
Fig. 70: Test Gen2 functions
16.9.1 Get All Tags
1
2
Fig. 71: Test Gen2 functions: Get all EPCs
①
Refresh
updates the tags read in the eld
► For EPC-specic operations, click on a tag to select it from the list.