User's Guide

139 of 146
16.14 Authentication
Using this function, it is possible to authenticate a tag.
The Authentication tab consists of 4 areas,
Get All Tags , Tags , Key and functions that are described below.
1
4
2
3 5
Fig. 90: Authentication
①
Password enters the access password; see Password for Operation
②
Get all tags reads all the tags in the antenna eld
③
Tags shows all the detected tags
④
Key see Key, p.139 ; necessary for TAM1 and TAM2
⑤
Functions see Functions
16.14.1 Key
1
4
2
3
Fig. 91: Authentication: Key
①
Key 0/Key 1
selects a key for the authentication ( Key 0 is only used for TAM1 , Key 1 is used for both TAM1 and
TAM2 )
②
Key
enters the key selected in ①
③
Crypto suite selects the crypto suite
④
see 16.14.2 Functions