User's Guide

141 of 146
⑥
Range
selects a range
Normal the tag operates in the normal range
Toggle temporarily
The tag temporarily toggles between normal and reduced operating
range but reverts to its prior persisting operating range when the tag
loses power
Reduced the tag operates in the reduced operating range
⑦
Set Untrace-
able on
selected tag
sets settings 1–6 on the selected tag
TAM1
TAM1 is used to check whether the selected tag is authentic.
✔ The tag has at least one activated key,
Key 0 or Key 1 .
1
4
2
3
5
Fig. 18: Authentication: key (TAM1)
Key see 16.14.1 Key
①
Authenticate
selected tag
the reader sends the authenticate command to the selected tag; a pop-up message appears
whether the authentication was successful or failed.
②
RRU → Tag
shows the random number sent to the tag by the reader
③
RRU ← Tag
shows the encrypted random number sent to the reader from the tag
④
AES
Decryption
shows the data decrypted from ③ by means of the key entered at ② in Fig. 91: Authentication:
16.14.1 Key, in the example above, this data contains the random number shown in ②