User's Guide
142 of 146
Operating the Reader Using the ReaderStart Software
TAM2
TAM2 is used to read the data of the selected tag.
✔
Key 1
has been activated.
1
7
4
2
3
5
6
Fig. 92: Authentication: key (TAM2)
①
Prole
selects a prole the data of which is shown
②
Oset
sets the oset for ⑤
③
Block count
sets how many bits rare to be read
④
Protection
mode
selects the protection mode for the TAM2 authentication operation
⑤
Read data of
selected tag
reads the data of the selected tag provided the correct key 1 has been entered at
16.14.1 Key
⑥
Data
shows data read in ⑤