User's Guide
19 of 146
Type Order number Far-eldhalf-powerbeamwidth Polarisation Frequency range
SMSH 3030 ©KRAI ETSI
FCC antenna 52010258 60°/60° circular 865–928 MHz
SMSH high-gain 3030
©KRAI ETSI antenna 52010259 60°/60° circular 865–868 MHz
SMSH high-gain 3030
©KRAI FCC antenna 52010318 60°/60° circular 902–928 MHz
SMSH Antenna ETSI 52010523 60°/60° circular 865–868 MHz
SMSH KRAI Antenna ETSI 52010524 60°/60° circular 865–868 MHz
SMSH Antenna FCC 52020526 60°/60° circular 902–928 MHz
SMSH KRAI Antenna FCC 52010527 60°/60° circular 902–928 MHz
Tip
Note that the ©KRAI SMSH high-gain antennas have a read range of up to 3m.
Tip
Note that only antennas with the mark "KRAI" can be cascaded. This is only possible with a Kathrein reader
that supports this function.
8.3 Further Reference Material
In order to congure the reader correctly and adapt it to the respective application, it is necessary to have detailed
knowledge of the EPCglobal standards of GS. This standard describes the principle of operation of the interface
between the tag and the reader.
The parameters available for the conguration of the reader are described in the
Conguration Manual for Kathrein RFID
UHF Readers
.
The reader is controlled via the Kathrein reader protocoll (KBRP), the current version of which is described in detail in the
Communication Protocol Kathrein RFID UHF Readers
.
Document Application
Communication Protocol Kathrein RFID UHF Readers
software development
Conguration Manual for Kathrein RFID UHF Readers
commissioning
Installation Manual for Kathrein Antennas
setup and installation
EPCglobal Gen2 Specication
1)
software development
Putty – SSH Client
(http://www.putty.org) software development
Make sure the version of the document matches the software version of the reader, see
https://www.kathrein-solutions.com/get-started.
1)
EPC
TM
Radio-Frequency Identity Protocols Class-1 Generation-2 UHF RFID Version 2.0.1 at
https://www.gs1.org/epcrd/epc-rd-uhf-air-interface-protocol/2-0-1.