User's Guide

70 of 146
Operating ReaderStart Software
LoadingReaderCongurationfromFile
► Under FIle , click Load reader conguration from le.
➯ The following window appears:
1
3
2
4
8 9
5
6
7
Fig. 42: File: load reader conguration from le
①
File
opens a dialogue to select the conguration le
To load reader conguration to le:
1. Click
File (④ in Fig. 36 ).
➯ A dialogue appears.
2. Select the directory and the conguration le from which the parameter sets will be
loaded.
3. Click
Open .
➯ The parameter sets saved in the conguration le are loaded and are marked
with a red tick.
➯ The progress bar (⑤) shows the progress of the save operation.
②
Parameter set
all available parameter sets from 0–7
Click the check box to select or unselect the parameter set.
The selected parameter set is marked with a tick. If the parameter is not
selected, the check box is empty.
③
All selects all parameter sets from 0–7
④
None unselects all parameter sets from 0–7
⑤
Progress shows the progress of the load operation by means of the progress bar
⑥
Status shows the status of the SetParameterByConfigID parameter
⑦
Error shows errors in the SetParameterByConfigID parameter