User's Guide

76 of 146
Operating ReaderStart Software
④
Connection cong
congures the secure connection and the backward compatibility
1
3
2
4
①
► Check Allow only secure connection so that all connections are secure.
②
activates or deactivates compatibility to Generation 2 KBRP
③
reads the current secure connection and backward compatibility conguration
④
sets the secure connection and backward compatibility conguration
⑤
NTP settings enters a preferred NTP
1)
server; see Changing NTP Settings
⑥
DNS server settings changes DNS server settings; see Changing DNS Server Settings
Changing NTP Settings
To simplify the time setting, it is possible to enter a preferred NTP server. This way, in a dened interval, the reader
retrieves the information from the NTP server and gets the time from the network, thus setting the internal time settings
of the reader.
► Click
NTP settings (②).
➯ The following dialogue opens.
1
3
2
4
5 6
7 8
9 10
①
NTP server enters an NTP server address, e.g. 0.pool.ntp.org
②
Interval
sets the interval in the range 0–4204967295 s to synchronise the time with the NTP
server
③
Time shows the current date and time of the reader
④
Status shows the status of the last performed operation in the NTP setting s dialogue
⑤
Get NTP server reads the NTP server settings currently set in the system
⑥
Set NTP server
sets the NTP server selected at ①
⑦
Get interval reads the interval currently set in the system
⑧
Set interval
sets the interval selected at ②
⑨
Get time gets the current time of the reader
⑩
Set time via NTP manually synchronises the time with the NTP server
1)
Network Time Protocol