User's Guide
8 of 146
Professional Installation Guidelines for the U.S.
5 Professional Installation Guidelines for the U.S.
5.1 Installation Personnel
UHF RFID readers require professional installation!
► You must be a professional installer with RF and related rule knowledge.
► The installation requires special trained professionals to access and setup the system.
► The system is not to be installed by the general public, general user shall not attempt to install
the device or change the settings.
5.2 External Antenna
► You must follow Part 15 of the FCC rules, and specically Part 15.203 pertaining antenna
requirements of an intentional radiator.
► Make sure to use a 13dBi or less patch antenna.
► Only use antennas which have been approved by the applicant. The use of none-approved
antenna(s) may produce unwanted spurious emissions or excessive RF transmitting power
which may lead to the violation of the FCC/ISED limit and is prohibited.
5.3 Final Output Power
WARNING
► Carefully select the installation position.
► Make sure that the nal output power does not exceed the limit set in relevant rules. The viola-
tion of the rule could lead to serious federal penalty!
If you are not a professional installer, STOP.
► Do not proceed any further with the installation.
► Do not install the unit or change the settings.