User's Guide

87 of 146
Ethernet
3
5
3
4
5
6
7
8
9
1
2
Fig. 50: Communication conguration Linux model: Ethernet
①
Refresh reads the current settings of the communication conguration Linux module
②
IP address
manually issues the address
Tip
It is only possible to use this parameter if the DHCP (⑥) is deactivated.
③
Subnet mask
manually issues a network mask
Tip
It is only possible to use this parameter if the DHCP (⑥) is deactivated.
④
Gateway enters the gateway
⑤
DHCP
activates/disactivates the automatic issuing of an IP address by a DHCP server; if the network
has a congured DNS server, it is also possible to use the host name of the reader.
⑥
IPv6 enters the second IPv6 address (the rst IPv6 address is the link local address)
⑦
Status shows the current reader IP address (eth0)
⑧
Get gets the current status
⑨
Set saves changes
If the data relevant to the current connection (e.g. IP address) are changed, it may cause an error and the
connection is lost.