User's Guide

72 of 146
Operating ReaderStart Software
Options
1
2
3
4
5
6
7
8
Fig. 43: Options
①
Language select
selects the user interface language between English / German / Spanish / French
1. Click Language select (① in Fig. 37 ).
➯ The four languages are shown. The language applied in the user interface is
marked with a tick.
2. Click on the desired language.
➯ A pop-up message appears:
Question. Please restart the programme to apply
changes. Restart now?
3. Click Yes to restart the programme and change the language or
Click
No to cancel the changes.
➯ If you have pressed
Yes , the programme restarts and the language of the user
interface has been changed.
②
Reset layout
resets the sequence of the tabs to default settings and reduces the size of the pro-
gramme to the window size
③
Change path to log le opens a dialogue to create a new folder/select a new directory to save logs
④
Show "No Tag" as
warning
activates or deactivates the warning (yellow) in the status eld if no tag has been
detected in the antenna eld; see Status Field, p.81
If this parameter is not checked, the absence of the tag is shown as error (red) in the
status eld; see Status Field, p.81
⑤
Auto tag read on tab
change
activates or deactivates reading tags after the tab change
⑥
Firmware update updates the reader rmware; see Updating Firmware, p.73
⑦
Date and time settings
sets date, time and time zone on the reader; see Changing Date and Time Settings,
p.74
⑧
Load factory defaults
loads factory default settings onto the reader; see Loading Factory Default Settings,
p.75