User's Guide
92 of 146
Operating the Reader Using the ReaderStart Software
Mobile Communication Interface (2G/3G)
5
3
4
5
6
7
8
1
10
9
2
11
12
13
14
15
16
17
18
19
Fig. 10: Communication conguration Linux model: mobile communication interface (2G/3G)
①
Go online at
start
activates or deactivates the GSM connection as soon as the reader starts
②
PIN
enters the PIN code for the SIM card
③
APN
enters the access point name from the provider
④
User name
enters the access point name from the provider
⑤
Password
enters the access point name from the provider
⑥
Get
reads the current conguration of the GSM module
⑦
Set
sets the conguration of the GSM module; only active when securely connected
⑧
Status
shows the status of the GSM connection
⑨
Type
shows the GSM connection type
⑩
Quality
shows the quality of the GSM connection
⑪
Firmware
version
shows the rmware version of the GSM module
⑫
IMEI
shows the serial number of the GSM module
⑬
Operator
shows the operator of the GSM connection
⑭
Phone number
shows the phone number of the SIM card