User's Manual

10
2. Introduction
2.6 Data sheet
RRUI 4 RFID UHF Reader System
4-Way Antenna Interface
Order no. 520 100xx
936.3276b Subject to change
The Kathrein RRUI 4 Series is a new GEN2 modularly designed reader sys-
tem which allows the user to select a wide range of different function blocks to
obtain an optimised solution for today’s RFID challenges.
The RRUI 4 Series is targeted to the next generation of RFID UHF applica-
tions to solve problems in the supply chain and in the manufacturing area. Key
segments are the Automotive Industry, Automation Systems, Telecommunica-
tions and Logistics.
The RRUI 4 Series is based on the
Impinj Indy R1000 UHF chipset to provide
highest performance with essential reduction of system costs.
General Speci cations: ECE Version US Version
Frequency range 865-868 MHz 902-928 MHz
Output power + 30 dBm + 30 dBm conducted (FCC)
Emitted power (max.) + 33 dBm ERP -
Protocols EPC Class1 GEN2/ISO 18000-6C
Nominal impedance (antenna ports) 50 ohms
LBT Sensitivity -96 dBm
Antenna interface 4 Port TX/RX interface with TNC-reverse (male) connectors
Communication interface see Reader overview
Operating system Kathrein Firmware @ ARM 9 Proc.
Power supply + 24 V DC ±10%
Operating temperature range -20°C to +55°C
Storage temperature range -20°C to +85°C
Dimensions 200 x 108 x 81 mm
Weight 1.32 kg
Environmental Protection see RFID UHF Reader overview
Conform to:
EN 302 208-1, EN 301 489-3,
CE, ETSI,
FCC
Technical Features:
System compliant to EPCglobal Gen2/ISO 18000-6C standards
• Software-de ned radio architecture based on
Impinj Indy R1000
Combined TX/RX antenna ports
Support LBT Listen before talk (ETSI EN 302 208-1)
Dense Reader Mode (DRM)
Modulation modes: DSB, PR-ASK
Output power range justable from 20 dBm upto 33 dBm (100 mW up to 2 W)
Ready for Kathrein RFID Antenna Interface KRAI ©
Delivery scope:
Reader System RRUI4-xxx-xx
Network adapter + 24 V DC (only covers IP 40)
Types with USB port: USB connecting cable A B
CD-ROM with manual and data sheet (pdf)