User's Manual
23
4. Software
4.3.4.3 Default confi guration
The default confi guration includes all the settings for the RRUI4 as supplied.
- I/O module Autodetect
o RS 485/422 1 start bit
8 data bits
No parity
1 stop bit
115200 bits per second
o Ethernet DHCP
o Network name
RRUI4_xxxx
(xxxx ... seq. unit number, is the same as USB no)
- Transmission power
o Antenna 1-4 27 dBm
- Channel selection All channels selected, no preferred channels
- Modulation type Double sideband modulation
- Carrier shut down time 5 s
- Communication profi le Profi le 6
- Antenna confi guration No antenna group, only fi rst antenna active
4.3.4.4 Licence key
The licence key contains information on the confi guration of the reader and options that describe
the functionality of the reader's fi rmware. Depending on the customer's requirements, these features
can be enabled or inhibited by Kathrein.
If you need a different confi guration, you can type a new licence key prepared by Kathrein in this
group box.
Note
A licence key that does not match this hardware may result in the reader ceasing to function.
In this case, please contact our sales department (for contact data see last page).