Operating Instructions Kathrein Radio Satelliten Receiver UFD 231 260376
CONTENTS Front, Rear and Remote Control Handset..................................................................................................... 3 Displays, Keys and Connections .................................................................................................................. 4 Technical Features....................................................................................................................................... 5 Preprogrammed Radio Programs............................
FRONT, REAR AND REMOTE CONTROL HANDSET FRONT REAR REMOTE CONTROL HANDSET 3
DISPLAYS, KEYS AND CONNECTIONS FRONT Power switch (with supply isolation) 1 Pushbuttons for program selection 2 3 4 Jack for headphone connection 5 Card slot for smart cards 6 Electrical output in SPDIF format for connection to DAT recorder for digital recordings (Cinch socket) 7 Audio output L + R, adjustable (Cinch sockets) 8 Audio output L + R, non-adjustable (Cinch sockets) Two-line, 16-digit LCD display REAR 1 Power supply socket 2 DATA socket IO for connection of an external infrare
TECHNICAL DESIGN DETAILS • Satellite receiving frequency range 950 - 2150 MHz • Reception of digital (ADR/DMX) and analog radio programs • Smart card reader for DMX radio programs • 120 DMX program memory • 100 ADR (free) program memory • 100 Analog radio program memory • Favorite mode for 200 program memory • Automatic station search with storing of ADR/DMX radio programs in standby mode • Two-line, 16-digit LCD-display for displaying DMX- and ADR-Info data (e.g. station ID, title, artist, album etc.
ADR RADIO PROGRAMS Prog.- ProgrammPlatz name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 6 Bayern 1 Bayern 2 Bayern 3 Bayern 4 BR 5 aktuell Bremen 2 DLF DLR-Bln DW DProg DW Euro 1 DW Euro 2 Eins Live Energy FFH FHH-DAB Fritz Horeb HR 1 HR 2 HR 3 HR 4 MDR Info MDR Kultur MDR Life MDR Sputnik NDR 2 NDR 3 NDR 4 NDR 4 spez.
DMX RADIO PROGRAMS Progr- ProgrammNumm. name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Progr. Sparte (Kategorie) SatFrequ. MHz Polarisation Orbit- Video- Oszill. Audioposition hub Frequ. modus Gruppe AudioFrequ. MHz Symphonic Chamber Opera Classic Classic Classic 11377 11377 11377 Vert. Low Vert. Low Vert.
DMX RADIO PROGRAMS Progr- ProgrammNumm. name 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 8 Progr. Sparte (Kategorie) SatFrequ. MHz Polarisation Orbit- Video- Oszill. Audioposition hub Frequ. modus Gruppe AudioFrequ. MHz Deutsche Schlager Regional Deutscher Rock Regional 10994 11171 Hor. Low Hor. Low 1 1 16 16 LO 1 LO 1 Stereo Stereo 8,10 7,92 French Chanson Regional 11509 Vert.
ANALOG RADIO PROGRAMS Progr Programm Platz Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 SatPolari- Orbit- Video- Osc. Audio Frequenz sation position hub Frequ. Mode MHz MHz Antenne Bayern Deutsche Welle 1 Deutsche Welle 2 Deutsche Welle 3 Sky Radio Radio Eviva SRI Intern. SRI Engl.
FAVORITE PROGRAMS Programmbank 1 Progr Programm Platz Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 10 Programmbank 2 Progr Programm Platz Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Programmbank 3 Progr Programm Platz Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
SAFETY AND INSTALLATION TIPS 1. Instructions Ready carefully through the safety- and operating instructions before switching the unit on. 2. Supply-voltage Operate the Receiver only from a supply voltage of 230 V and 50 Hz supply frequency. The unit is not be connected up to the supply before the installation work is completed. 7. Ventilation The heat generated in this unit will be dissipated satisfactorily. Never install the receiver unit in a cupboard, stand or rack where there is inadequate ventilation.
DESCRIPTION OF KEYS ON REMOTE CONTROL HANDSET 8 ADR 1 This key switches the receiver into standby or back into operation again. Caution: No supply isolation. Note! If the receiver is switched into standby and the appropriate setting has been made in the initial setup menu, an automatic station search will be carried out for ADR- and DMX-programs. This is then followed by an automatic switch into standby (factory setting). See also under "Search" in section "Programming".
RECEIVER OPERATION The extensive equipping of this receiver permits reception of digital DMX pay-radio programs (with a card), free digital ADR radio programs and also analog satellite radio programs. In the operating description that follows it is assumed that the receiver has already been properly connected up by a competent specialist. If this is not the case, and you intend setting up the connections yourself, please read the section "Connection and Start-up" beforehand.
RECEIVER OPERATION Analog radio programs To receive the analog radio programs press the "RADIO" key. The LCD display readout indicates "R .. " together with the most recently selected radio program position. Information, such as that for the digital radio programs (ADR and DMX), is not available with analog radio programs. With analog radio programs, the program name is entered in the setup menu.
RECEIVER OPERATION ⇓ Setting of desired program bank with: FAVORITE Setting of desired program position with: or the numeric keys 0..9 ⇓ Press key ok. ⇓ Display readout: Display of selected program alternately flashing with [ok] ⇓ Input of the desired program from the DMX-, ADR- or analog radio bank. ⇓ Confirm input with ok. ⇓ Setting of next program position and input of further favorite programs in the same manner. ⇓ Exit from programming mode with key BACK (press repeatedly).
RECEIVER OPERATION Further setting possibilities for the Info displays are: 1. Step on through the Info data manually with the ok key. 2. Info data running independently (scrolling) (the scroll interval is adjustable from 1 to 5 seconds). 3. Fade-in title and artist only. 4. Fade-in title and author only. Setting of desired display: MODE + Numeric key 1, or 2, or 3 or 4 according to desired display (press in succession). This setting is independent of the setting in the Info menu.
Connection and Start-Up Attention: Do not connect the unit to the electrical supply until after all other installation work has been carried out in accordance with regulations • Satellite signal connection Connect the Sat-IF input of the receiver to the satellite receiving installation. If there is a short circuit in the LNB supply voltage, the LNB supply voltage is turned off and the notification message "OVERLOAD" is displayed on the LCD display.
PROGRAMMING RADIO PROGRAMS The satellite receiver has been preprogrammed in the factory. The predefined programs are all listed on pages 6 to 9 (German)! Display readout: SAT-FREQUENCY < 11214 MHz > The setting can now be made. ⇓ Input of the new satellite frequency with the numeric keys 0...9 or the keys More and more new programs are continually being transmitted via the satellites. To program-in these new programs you can obtain the necessary receiving parameters from current satellite magazines.
PROGRAMMING RADIO PROGRAMS Oscillator The receiver is preprogrammed with 4 different oscillator frequencies (LO-settings) to allow matching to different feeder systems. This also allows problem-free operation of the receiver with other feeder systems (receiving systems) that possibly use a different oscillator frequency. The following oscillator frequencies frequencies) are preprogrammed.
PROGRAMMING RADIO PROGRAMS Search for ADR- and DMXprograms To locate new ADR- and DMX-programs the automatic search can be set up in the Initial Setup Menu for the UFD 231 receiver (setting in the delivered state). The automatic search is started if the receiver is switched into standby using the key on the remote control handset. In the process the receiver searches through the entire frequency range for new programs. If any are found the receiver then saves these programs.
INITIAL SETTING The matching of the satellite receiver to the satellite receiving installation is carried out in the Initial Setup Menu. The setting in the Initial Setup Menu is carried out in the same way as for the normal setup menu during station programming. The receiver has however already been factorypreprogrammed for standard satellite receiving installations Changes to the initial settings are therefore only necessary if your receiving installation differs from these types of installation.
INITIAL SETTING LCD display language In this menu the LCD display language can be set up. The available languages are: German, English and French Presetting: German Program selection The unit allows you to enter the program number in one-, two- or three-digit form.
INITIAL SETTING The following settings are possible: General directions ⇒ 22 kHz 1) ⇒ Tone Burst 2) ⇒ Full DiSEqC • For particular queries relating to subscriptions to DMX programs and problems concerning smart cards contact (only for Germany): Off, High/Low or Pos. 1/2 Off, High/Low or Pos. 1/2 Off, On or Remote Mode 1) Tone Burst (simple DiSEqC) 2) Full DiSEqC (to Eutelsat specification) The setting is dependent on the receiving system that is used.
Technical Data HF range: Frequency range: Input level range: IF band width: FM threshold: 950 - 2150 MHz 47 - 78 dBµV 27 MHz <7 dB Audio (digital) Standard: ISO/IEC 11172-3 (MPEG-1/Layer II) Audio carrier freq. range: 0.18 - 8.82 MHz Tuning: Search, direct input and adjustable in groups Bandwidth: 130 kHz Frequency range: 20 Hz - 20 kHz Distortion factor (1kHz): <0.
MENU STRUCTURE Setup Menu Return with BACK Open setup Menu: Press MODE+RADIO or Open setup Menu: Press MODE+ADR or Open setup Menu: Press MODE+ DMX Call-up and activate with OK Radio program entry ---> (OK) Sat-frequency 11214 MHz or else Polarization hor.
MENU STRUCTURE Initial setup menu Return with BACK Call-up and activate with OK Setting possibilietis Open Initial Setup Menu General-Menu entry-->(OK) LNB-supply On/OFF LNB-supply in stand by On/Off LNB voltage step-up On/Off Language Program selction Oscillator-Menu entry--> (OK) LO 1 09750 MHz LO 3 9750 MHz ditto 22 kHz signal Full DiSEqC Search 26 ditto High/Low Pos 1/2 Off High/Low Pos 1/2 Off ON Off Remote-mode On/Off Frequency band High / Low Orbit position Position 1, 2, 3
MENU STRUCTURE Info-Menu Return with BACK Call-up and activate with OK Setting possibilities: TTA-Data-Menu MODE + INFO TTA-scroll-line Interval: 2 sec Display TTA-DATA -->OK Not possible in Radio mode Separetely adjustable for ADR- and DMX-mode Not available in DMX-mode Selection of menu entries with 1...5 sek.