Technical data

936.3654/-/ZWT/0110/e - Technical data subject to change.
Technical Specifi cation
¹
)
At mid-band
²
)
G/T at 11.3/12.5 GHz under standard ambient conditions (clear sky)
³
)
At a dynamic pressure of 800 N/m² to EN 60728-11
All fi gures are typical values!
If the maximum load is exceeded,
parts could break away!
Type CAS 06 CAS 60
Order no. 20010005 20010006
Diameter cm 57 57
Colour White (similar to RAL 9002) Graphite (similar to RAL 7012)
Reception range GHz 10.70-12.75
Antenna gain at
10.70-11.70 GHz/11.70-12.50 GHz/12.50-12.75 GHz dBi 34.9/35.5/35.9
Half-power beam width ¹
)
° < 2.8
Figure of merit ²
)
Central feed system
UAS 571/572/584/585
UAS 481
dB/K
14.7/15.7
14.0/15.0
Figure of merit ²
)
Feed system spacing 6°
UAS 571/572/584/585
UAS 481
dB/K
14.3/15.3
13.6/14.3
Figure of merit ²
)
Feed system spacing 9°
UAS 571/572/584/585
UAS 481
dB/K
13.6/14.4
12.9/13.7
Cross-polarisation decoupling dB > 27
Wind load ³
)
N 300
Max. allowable wind speed km/h 157
Mast clamp range mm 38-60
Setting range Elevation/Azimuth ° 5-45/360
Dimensions
(width x height max. x protrusion max. from mast centre without feed system)
mm 599 x 759 x 528
Packing unit dimensions mm 800 x 655 x 200
Weight approx. net/gross kg 4.8/5.6
Warranty conditions for the antenna corrosion resistance
Important instructions relating to the warranty conditions for the
corrosion resistance of Kathrein offset parabolic antennas:
● The antenna must be assembled and mounted professionally, following the steps described
in the enclosed instruction sheet
● The antenna must not be modifi ed (e.g. by drilling)
● The antenna must not be damaged mechanically (e.g. deformation, deep or extensive damage,
or abrasion of the powder coating and surface coating)
● The antenna must not be damaged due to exposure to chemicals (e.g. solvents, lacquers,
detergents or the like)
● Only genuine Kathrein accessories may be used for the antenna
These warranty conditions are effective from the date of purchase.
Only the original sales slip is acceptable as proof of purchase for warranty claims.
Furthermore, corrosion resistance is not warranted for the consequences of force majeure, e.g. lightning strike, or if the antenna is
used in regions where frequently occurring, abrasive weather conditions may wear off the protective coating within a short period of
time (e.g. sandstorms).
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim • GERMANY • phone [phone] • Fax [phone]