Technical data

9 / 32
CAS 06 20010005
CAS 60 20010006
Offset parabolic antennas
Re ector made of aluminium, powder coated
Feed system support made of galvanised sheet steel,
plastic coated
Mast clamp made of sheet steel, hot-dip galvanised
Optimal electrical data combined with very compact
mechanical dimensions due to offset feed
Available in graphite or white
Items supplied: Re ector, mast and feed system support,
hexagon key (size 5)
Features
Without additional components, two universal feed
systems to receive signals of satellites 6° (e.g. ASTRA/
EUTELSAT-HOTBIRD) or 9° apart can be mounted on
the boom
Proper use (use for the intended purpose)
The CAS 06/CAS 60 parabolic antenna is intended solely for the reception of satellite signals and for use only as a domestic
antenna.
DIN 4131 speci es that a domestic antenna should have no more than 6 m free mast length and a xed-end moment up to 1650 Nm.
It is unsuitable for mounting on structures that are liable to vibration.
Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with. If this
load is exceeded, parts could break away!
The CAS 06/CAS 60 parabolic antenna is designed for use with a feed system (LNB) for reception of the signals from one satellite
position, or two feed systems for multi-feed applications for reception of the signals from two satellite positions 6° or 9° apart.
If the additional ZAS 90 multi-feed adapter plate accessory is used, the parabolic antenna is also suitable for three feed systems.
The feed systems and instructions for their installation are not included in the scope of supply of the parabolic antenna.
Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that
speci ed above will invalidate the warranty or guarantee.
In particular, never
modify any of its components or
t any components other than those expressly intended by the manufacturer for use with the antenna.
Breach of these rules may lead to the antenna no longer being suf ciently stable and safe!
Electronic equipment is not household waste in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT
AND THE COUNCIL dated 27
th
January 2003 on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal to an appropriate of cial collection point.