Antenna Measuring System Operation Manual

Example

Switching on the 22 kHz signal

Press the

button

LC display:

• LNB voltage: 14 V

• Current consumption: 150 mA

• 22 kHz signal switched on

Press the button again to switch off the 22 kHz signal.

Press

to exit the LNB menu.

Note

SAT

FREQUENCY DISPLAY AND ENTRY

To measure the level of a reception signal, you must ﬁ rst enter the

desired frequency. The LC display indicates the frequency and the

measured level. The frequency can be entered from 920 MHz to

2150 MHz in 100 kHz intervals.

COMMAND OVERVIEW OF SAT FREQUENCY ENTRY

Switch to satellite reception (analogue or digital)

... Enter frequency

Frequency can be changed in 100 kHz intervals

Conﬁ rm entry

Example

To enter the frequency 1236 MHz:

Press

LC display:

• Frequency: 1236.0 MHz

• Operating mode: SAT

• Level: 86.5 dBµV D (D = digital)

DIGITAL SAT RECEPTION

In SAT mode the MSK 125 can be adjusted to “Analogue” and “DVB S(2)” reception types.