Operation Manual

10
BASIC INFORMATION ON OPERATION
To open the zoom window, hold your fi nger longer
on the marker; you can then shift it to the desired
position.
Press the “FUNCTION” button, tap on the screen
and drag the section of the image using your fi nger
(e.g. for the scope the delay time, for the spectrum
analyser the centre frequency).
This type of button indicates an option that is not currently available on this unit.
This type of button indicates a function that is currently active in the unit.
Tap on this type of button to switch between two operating modes (e.g. 22 KHz signal
ON/OFF).
Press this button to run a function directly, e.g. here to print out the contents of the screen.