Operation Manual

11
OPERATION
SELECTION OF THE SIGNAL SOURCE AND THE MEASUREMENT
The most important buttons on the MSK 200 are the and the button.
After pressing the button the source, that is the channel to be measured, can be defi ned. After
pressing the button the required measurement can be selected and made. On the MSK 200's
display the ANALYSE menu is always at the edge of the screen, the SOURCE menu beside it.
The two are to be considered and operated as independent of each other.
SELECTION OF THE SIGNAL SOURCE
By pressing the hard key you can open the selection of the signal source.
The following sources can be selected:
Digital cable TV
Digital satellite TV
Digital terrestrial TV
Analogue cable TV
Analogue satellite TV
Analogue terrestrial TV
Analogue radio (FM)
Audio/video or transport stream input
Note: Not all signal sources can be selected for each measurement. For this reason, it is
recommended to open the spectrum analyser prior to changing the source (see chapter
“Selection of the measurement”).
Provided you have already selected a source, the related help fi le is opened by pressing
the
button.