Twin-PVR Satellite Receiver Operating Manual

19
Use the

buttons to make the settings.
Channel Search
Use the

buttons to select whether you want to use the factory
default channel list or whether you want to search for more/new
channels.
FTA CA Select:
- All: FTA (free-to-air) and encoded channels are searched for
- FTA: Only free-to-air channels, such as ZDF in Germany, are
searched for
- CA: Only encoded channels, such as Austria’s ORF, are searched
for
Network Search
If you set the network search to “Off”, only the factory stored
transponders of the satellites you previously selected will be scanned
for new as yet unlisted channels.
If you set the network search to “On”, the transponder network enables
additional transponders that have not yet been stored to be located.
They are then stored and scanned for new channels in the same way
as the existing transponders.
Press

to start the channel search, or if you set the channel search to
“Off” you are guided straight to the next item in the first installation
process.
If the search is successful, you see the following message (example):
First Installation
Press

to confirm storing of the newly found channels and move on
to the next step in first installation.
Encoded channels
can only be decoded with
a CA module and matching
Smartcard. CA modules
and Smartcards are not
included in the product
package. Please contact
your Pay-TV provider.
Number of channels in the
pre-programmed channel list