User manual

7 / 13
The display always refers to one of the eight channels in the head-end. First select the channel 1 to 8 for which you wish
to change the settings.
2.1 Input confi guration
Input
The socket A or B to be used for the input can be selected in the selection box Input for the selected
channel unit.
Satellite
In the Satellite selection box a known satellite can be selected from the USW 30 satellite list.
Transponder
The Transponder selection box contains a list of transponders that are available at the connected
selection plane of the selected input. The precondition for this is that the transponders are given in the
satellite list.
The selection of a transponder automatically sets the values for the Sat-Frequency, ZF frequency
and Symbol rate.
In addition, the following search dialogue for channels and transponders can be activated by the
button to the right next to the selection box: