User manual

11 / 13

2.6 Software Conﬁ guration

General settings can be made in the menu Settings | Basic Settings. Within the individual tabs a variety of settings can

be performed. They can also be called up by the Settings button to the right of the ZF frequency row.

2.6.1 Interface settings

In the upper part of the dialogue window the ports required for communication with the UFOnano systems can be acti-

vated:

● Select interface: Mark the checkbox of the interface.

● Delete interface: Select the interface with the left mouse button and press the Remove button.

New interfaces can be added underneath the list of existing interfaces. If the UFOnano system has been connected with

the PC, for example, via interface COM9, then enter COM9 in the text ﬁ eld and press the Add button. The new interface

will immediately be added to the list.

2.6.2 Frequency settings

The values for the LO frequency and the frequency for automatic changeover of the desired frequency band depend on

your satellite system, and in particular on the conﬁ guration of the LNB or a satellite matrix. The frequencies can be conﬁ g-