Specifications

9 / 11
The “Filter” programme fi lter operating mode is selected in the TP (Transport stream processor) sub-menu.
The “TP” transport stream processor is selected using the “<” and “>” buttons and the sub-menu is called up using the “Sub-menu”
button
. The “Filter” programme fi lter is selected using the “<” and “>” buttons and is activated/deactivated using the “+” and “-” buttons.
The settings available are: Filter “on” / “off”.
This sub-menu can be exited only when the cursor is on the “on / off” parameter.
To do this, use the “<” and “>” buttons to select “on” or “off” and press the “Sub-menu” button
to return to the main menu.
“Transport stream processor” sub-menu
*** UFO378TP-O1 ***
Filter not lit
42 %/51 %
IDs
When changing to the “Filter” sub-menu
Channel
information
is read in
....
When programme fi lter “on” is selected a “P” appears at the top right of the main menu.
To process the programme list for the programme fi lter, press the “Sub-menu” button
on the “Filter” parameter in the programme
fi lter. This reads in the current channel table from the transponder. A progress bar appears while this is being done.
As soon as the channel unit has successfully determined this information, the sub-menu for adjustment is displayed.
“Filter” sub-menu
*** UFO378TP-O1 ***
T / 001 / 009
Das Erste / -
Compile
“Filter” sub-menu
*** UFO378TP-O1 ***
T / 001 / 009
Das Erste / -
Compile
The fi rst line shows the type of the channel that was selected, together with the number of the channel and the number of channels on
the transponder.
T = TV channel R = Radio channel D = Data service
Channel no. (e.g. 001) / Quantity (e.g. 009)
of the selected channel of the channels on the transponder
The second line shows the channel name, together with its fi lter status (+ or -).
The default setting for the status of the channels that are displayed is “-”, i.e. no programmes are transmitted when the programme
fi lter is switched on, but the programme list is not processed.
The “Compile” button in the third line starts the compilation of the programme list, which then becomes effective.
The selection of the channels carried over is performed using the “+” and “-” buttons, where the status “+” means the channel will be
carried over and the status “-” means it will be removed. The “Status” parameter is selected using the “<” and “>” buttons.
The settings become effective when the fi lter table is compiled. This is done using the “<” and “>” buttons; select the “Compile”
parameter and use the “+” or “-” buttons to initiate the compilation of the channel table.
Note: The programme fi lter can be processed even if it is not activated (“off”). This means that the operation can be checked
or temporarily deactivated without waiting times or reprogramming.
If the programme list was not processed but the programme fi lter was switched on, the previously saved list remains
active, or in the absence of any list no programmes are transmitted.
“Filter” sub-menu
*** UFO378TP-O1 ***
T / 001 / 009
Das Erste / -
Compile
On compiling the programme fi lter
Programme fi lter
being compiled
....