Operating instructions

41
Transmission channel
Use the

buttons to switch to the “Transmission channel” line and use the

buttons
to select a free and available transmission channel.
Transmission frequency
Use the

buttons to switch to the “Transmission frequency” line and use the

buttons
to select a free and available transmission frequency, or use the number keys to enter the required
frequency. When doing this, bear in mind the assignment of transmission frequencies to transmission
channels.
Secure channel with PIN
If your one cable system allows the transmission frequency to be protected by inputting a PIN, this is
the menu where that can be done. No other receiver can then use this transmission frequency unless
the PIN is input.
Use the

buttons to switch to the “Secure channel with PIN” line and then use the

buttons
to select “Yes”.
You then have the facility of using the number keys to input a PIN code (0-255) in the line beneath
“Password PIN”.
Test connection
Use the

buttons to switch to the “Test connection” line and then press the

button to test
your settings.
Connection and setup
Refer to the documentation supplied with your system for the settings for
the SCRs, frequencies and any PIN assigned to the tuner. You will fi nd there
a printed list showing the assignment between the various SCRs and the
respective transmission frequencies. It may happen that you cannot freely
select the PIN for protection of individual frequencies; this also may be listed in
the documentation for the single-cable components.
Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.