Operation Manual

107
Video settings
After calling up the menu you will see
the following display (depending on the
selected signal output):
For output of the TV picture via the
HDMI output:
For output of the TV picture via the Scart-TV
output:
Main menu - Settings
Individual items are selected using the

buttons. Changes to the current settings can be made
using the

buttons.
Screen output via
Here you select the connection on the receiver to which you have connected your TV set. Either
HDMI/YUV Resolution
Here you can select the picture resolution that will
be sent to the TV set. Either
- 1080p (resolution 1920 x 1080, full-screen
images),
- 1080i (resolution 1920 x 1080, half-screen
images),
- 720p (resolution 1280 x 720, full-screen
images),
- 576p (resolution 720 x 576, full-screen images)
TV Aspect Ratio
Select your TV’s format here. Either
- 4:3 or
- 16:9
HDMI/YUV (see also note on the next page) SCARTor
For this, refer to the operating manual for your TV set and take care to select only
those settings that your TV set can process.