Operation Manual

66
The following on-screen display appears (example):
Use the cursor (

) buttons, the

buttons or the

button to select the desired start of the
section for the copy and then confi rm by pressing the

button.
The following on-screen display appears (example):
Use the cursor (

) buttons, the

buttons or the

button to select the desired end of the
section to copy and then confi rm by pressing the

button. The following on-screen display appears
(example):
Use the

buttons to select
“Copy recording” and confi rm by pressing
the

button. The receiver will then
commence the copy operation for the
section that you have selected.
During copying, you will see the following
on-screen display (example):
On completion of the copying operation, the receiver automatically skips back to the recording archive.
The copy is assigned the same name as the original, except that a “C” is added at the end of the name.
If you want, you can now call up the “Rename” editing function, as described in this section, to assign
it a new name.
Copy
Recording archive (playing back/editing recordings)