Operation Manual

Connection and set-up

Motorized antenna (DiSEqC™1.2)

Go to Null Position

Select the “Go to Null Position” selection ﬁ eld. Press the



button to instruct the turntable to move to

its null position.

Set Borders

Select the “Set Borders” selection ﬁ eld. In this menu you can set the borders for your turntable. This is

particularly necessary if the turntable has only a restricted range in which it may turn before striking an

obstruction (such as a wall or tree).

Press the



button. The following on-screen display appears:

The following buttons allow you to control

the movement of the turntable:



Start slow rotation to West



Rotate to the West step by step



Stop the current movement



Rotate to the East step by step



Start slow rotation to the East

Once you have reached the desired “East”/“West” border, switch to the respective ﬁ eld “Set current

position for “****” border” and press the



button to conﬁ rm.