Operation Manual
22
Select Satellites - Tuner 1
Go to the “Select Satellites” line. Press the
button.
The following on-screen display appears (example):
Connection and set-up
If you subsequently want to delete the set borders, switch to the “Reset border positions” fi eld and press
the
button to confi rm deletion of the borders. You can then set new values for the limits. Once you
have set all the borders, press the
button.
Here, select up to 64 satellites to be
included in the signal on the tuner.
Select the satellite you want and confi rm
your selection with the
button. The
selected satellites will be identifi ed with
a tick.
When you have selected the desired satellites, press the
button.
Confi gure Satellites
Go to the “Confi gure Satellites” line. Press the
button.
The following on-screen display appears (example):