Operation Manual

24
Connection and set-up

Rotate to the East step by step

Start slow rotation to the East
Set the turntable so that both of the bars “Signal-Strength” and “Signal-Quality” on the right of the screen
show the highest available percentage values.
When you have reached the best possible signal strength, move to the “Store actual position” line and
press the

button. The receiver will now save these values for this satellite and skip automatically
to the setting for the next satellite.
If you have selected more than one satellite for the tuner, defi ne the settings as just described for the
fi rst satellite, for the second satellite and for any other selected satellites.
When you have completed all settings for the selected satellites, press the

button.
When you have completed all settings for the tuner, press the

(green) button.
The receiver will automatically display the screen for the channel search. Continue the fi rst installation with
the “Channel search” section.