Operation Manual

32
Connection and set-up
Select the “Yes” option using the

buttons on the “OneCable System
Used” line. Now go to the selection fi eld
“Tuner 1 & 2: OneCable System”. Press
the

(green) button.
In the reception system fi eld select the OneCable system in use:
- EXR .../EXU ... For all Kathrein OneCable matrices
- UAS 481 For the Kathrein OneCable LNB UAS 481
- User-defi ned For all OneCable systems not covered by the above
OneCable system
Refer to the docu-
mentation for your
reception system or
seek assistance from a
specialist engineer.
Refer to the documentation supplied with your system for the settings for the SCRs,
frequencies and any PIN assigned to the tuner. Here, you will fi nd a printed list
showing the assignment between the various SCRs and the respective transmission
frequencies. You may not be able to freely select the PIN for protection of individual
frequencies; this also may be listed in the documentation for the one cable
components.
Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.
Continue as described in the fi rst installation for the type of one cable reception you selected.