Operation Manual

34
Number of Satellites
Select the number of satellites present
in the signal at Tuner 1 (two max.).
Select the line “Satellite 1: .....”. To set
or change the currently selected satellite,
press the

button. The following
on-screen display appears (example):
Connection and set-up
On the “Satellite” line select the satellite whose settings you wish to edit.
Satellite:
Select the desired satellite using the

buttons. Alternatively you can press the

button to
view a list of all stored satellites then select the required satellites from this list.
LNB Type:
If your reception system does not have a universal LNB, use the

buttons to select the LNB types
that are used in your reception system. You can choose from the following LNB types:
- Universal
- Simple or
- User-defi ned
If you do not use a Universal LNB, press the

button. You can now defi ne the settings for your
LNB type (simple or user-defi ned).
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.