Operation Manual

Connection and set-up

LNB Frequencies (MHz):

Enter the LNB frequencies (Low/High/Limit) using the number pad. Now use the



button to save the

new values.

Test-Transponder:

Select the “Test-Transponder” ﬁ eld. Here you can select a transponder for checking whether your

settings are correct using the signal strength bar and signal quality bar.

When you have completed all settings for the selected satellites, press the



button.

If you have selected two satellites, conﬁ gure the settings as just described for the ﬁ rst satellite for the

second satellite.

When you have completed all settings, press the



(green) button.

When you have completed all of the settings, you will automatically see the on-screen display for the

channel search. Continue the ﬁ rst installation with the “Channel search” section.

OneCable system - UAS 481

Use the



buttons to select

“UAS 481” on the “Conﬁ gure System” line.

Press the



(green) button.

The following on-screen display appears:

Tuner 1:

Select a free available transmission channel (SCR 0 - SCR 3).

Tuner 2:

Select a free available transmission channel (SCR 0 - SCR 3).