Operation Manual

Connection and set-up

When you have completed all settings, press the



button.

Number of Satellites

Only one satellite can be received with the UAS 481. This setting cannot be altered.

Select the line “Satellite 1: .....”. To set

or change the currently selected satellite,

press the



button. The following

on-screen display appears (example):

Satellite:

Select the desired satellite using the



buttons. Alternatively you can press the



button to

view a list of all stored satellites then select the required satellites from this list.

Test-Transponder:

Select the “Test-Transponder” ﬁ eld. Here you can select a transponder for checking whether your

settings are correct using the signal strength bar and signal quality bar.

When you have completed all settings for the selected satellites, press the



button.

When you have completed all settings, press the



(green) button. The receiver will automatically

display the screen for the channel search. Continue the ﬁ rst installation with the “Channel search” section.