Operation Manual

Connection and set-up

On completion of a successful ﬁ rst installation (TV picture can be seen) we recommend having the

receiver search for any available software update. In order to do this, you must have selected (included

in the selection) the satellite ASTRA 19.2° East in the ﬁ rst installation. Press the



button to switch

to the Mainmenu. Use the



buttons to select “Service Menu” and conﬁ rm by pressing the



button. Now use the



buttons to select “Software Update by Satellite” and then press

the



button to conﬁ rm. The receiver will now automatically start to search for new software. For

information on the rest of the update process, refer to the section “Mainmenu”, “Service Menu”,

“(Software) Update by satellite” in the Operating Instructions – Part 2.

Once the ﬁ rst installation has been successfully carried out you may change the channel list(s) as

you wish. See Operating Instructions – Part 2, section “Mainmenu - Edit TV-Channellist”.

If there have been changes to the ASTRA channel list, you will see the following on-screen display(s)

(example):

If you do not want to edit the channel positions of new channels you can leave the corresponding

screen by pressing the



button. The new channels will then be saved in the channel positions

recommended by the receiver.

or:

Pressing the



button takes you directly to the “Edit TV-Channellist” menu. If you wish to modify

the channel list, please see Operating Instructions – Part 2, section “Mainmenu - Edit TV-Channellist”.

Tip!