Operation Manual

45
Connection and set-up
Use the

buttons to select the “Get
IP Address” fi eld and confi rm by pressing the

button.
Your DHCP server/router now indicates the
IP address to the receiver. As soon as the
receiver has been assigned its IP address by
the DHCP server (IP address is displayed),
switch to the “Save” fi eld and press the

button to confi rm.
Defi ne the settings for your network as required.
When you have completed all the settings,
switch back to the “Save” fi eld and press the

button to confi rm.
Confi guration example:
Receiver:
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
PC/Laptop:
IP address: 192.168.1.4
Subnet mask: 255.255.255.0
If no connection can be established
between the receiver and DHCP server/
router with the “DHCP On” setting, switch
the setting to “DHCP Off” and defi ne
the setting as described for DHCP “Off”.